Late 2018 I finally pulled the trigger and bought a Unifi 16XG 10GbE switch, I’ve wanted one for a long time. When I plugged it in for the first time, I realized it was pretty loud… It was the loudest thing in my rack — bummer.

I’m used to the Unifi switches having temperature controlled fans; the 16XG however does not. I’ve read about people replacing the fans on the USG-PRO-4 with ultra-silent Noctua fans. However, those are 40 mm fans. The 16XG has 30 mm fans, which Noctua doesn’t make.

Comparing the chip temperature of the 16XG to my 16 POE-150W, I noticed the 16XG ran a lot cooler. Like 25°C cooler — the 16 POE-150W was stable at 65-68°C and doesn’t even turn on the fan until 70°C. While the 16XG was hovering around 40°C, it seemed like I could safely lower the fan RPMs a bit.

I used two Noctua low-noise adapters (RC-10) and connected them in series with the 16XG internal fans. The sleeve on these is pretty stiff, so I carefully cut it off using a scalpel. The adapters made a world of difference; there is still some noise, but it’s not dominating like it used to be.

Noctua low-noise adapters in series with Unifi 16XG fans

Noctua low-noise adapters in series with Unifi 16XG fans

The chip temperature of the 16XG went up a bit, from around 40°C to 45°C, which seems perfectly safe — considering the running temperature of the other Unifi switches.